Wednesday, September 11, 2013

Instructions For The Ilive Boom Box

For iPod owners wishing to listen to their devices via a portable set of speakers, iLive produces a special line of boom boxes that come equipped with built-in iPod docks. These boom boxes also feature the ability to tune into radio broadcasts and, on some models, CD playback functionality. Because the various models feature different designs, the operating instructions vary slightly from one to the next. However, the control scheme remains largely consistent throughout the product line.


Instructions


Setup


1. Turn off the boom box. The power switch or button is located on the front or top panel, depending on your model.


2. Hold down the "MEMORY/CLOCK ADJ" or "MEM/CLK ADJ" button to access the clock setup feature. Use the "FWD" or "REV" button to toggle between the 12-hour and 24-hour time formats. The boom box's display will indicate the selected format.


3. Press the "MEMORY/CLOCK ADJ" or "MEM/CLK ADJ" button to advance to the hour setting. Use the "FWD" or "REV" buttons to input the current hour. Adjust the minute setting in a similar way.


iPod


4. Turn off the boom box. Insert the iPod into the boom box's docking station. Some models have a dial labeled with the names of various iPod models; if this is the case, turn the dial to match your model of iPod.


5. Turn on the boom box and press the button labeled "iPod."


6. Press the "PLAY/PAUSE" button to begin playback. Use the "FWD" and "REV" buttons to skip through the available tracks. Use the "VOLUME UP" and "VOLUME DOWN" buttons to adjust the playback volume.


7. Press the "STOP" button to stop playback. Turn off the boom box and remove the iPod from the docking station, if desired.








CD


8. Turn on the boom box and press the "FUNCTION" button repeatedly until the display indicates that the device is in CD mode.


9. Insert the CD into the device's slot, with the label side facing toward the LCD display.


10. Press the "PLAY/PAUSE" button to begin playback. Use the "FWD" and "REV" buttons to skip through the available tracks. Use the "VOLUME UP" and "VOLUME DOWN" buttons to adjust the playback volume.


11. Press the "STOP" button to stop playback. Press the "EJECT" button to eject the disk from the boom box.








Radio


12. Turn on the boom box and press the "FUNCTION" button repeatedly until the display indicates that the device is in radio mode. Press the "BAND" button to toggle between AM and FM radio.


13. Use the "FWD" and "REV" buttons to cycle through the available stations. Pull out and rotate the boom box's antenna to adjust FM reception. Turn the boom box to the left or right to adjust AM reception. Use the "VOLUME UP" and "VOLUME DOWN" buttons to adjust the volume.


14. Hold down the "MEMORY/CLOCK ADJ" or "MEM/CLK ADJ" button to save the current station to a preset slot; use the "FWD" and "REV" buttons to select the desired slot, then press "MEMORY/CLOCK ADJ" or "MEM/CLK ADJ" to confirm. Press "M-UP" or "M-DN" to cycle through the preset stations.

Tags: Turn boom, MEMORY CLOCK, boom press, buttons adjust, CLOCK button, DOWN buttons