The Motorola Motopure H12 Bluetooth Headset is powered by an internal, coin-cell battery. The battery should be recharged as needed, to ensure it has enough power when you need to use it. Depending on when your headset was sold, it was sold with either a charger case or desktop charger. Motorola recommends only charging your headset with one of these two devices. Using any other charger will void your manufacturer's warranty.
Instructions
1. Turn the Motorola Motopure H12 Bluetooth Headset off.
2. Insert the power cord into the charger port on either the charger case or desktop charger. Plug the opposite end of the cord into an electrical outlet.
3. Align the Motorola Motopure H12 Bluetooth Headset charging contacts, on the back of the headset, with the charging contacts in either the charger case or desktop charger. Position the headset so the headset contacts align and rest on the charger's contacts. Once the headset and the contacts are properly aligned, the headset charging light will turn red, within 60 seconds, indicating the battery is recharging.
4. Lift the headset away from the charger when the charging indicator light turns green, indicating the battery is fully charged. A fully discharged battery will take 2 1/2 hours to recharge.
Tags: Bluetooth Headset, Motopure Bluetooth, Motopure Bluetooth Headset, Motorola Motopure, Motorola Motopure Bluetooth, case desktop, case desktop charger